Enum domain::base::iana::exterr::ExtendedErrorCode

pub enum ExtendedErrorCode {
    Other,
    UnsupportedDnskeyAlgorithm,
    UnsupportedDsDigestType,
    StaleAnswer,
    ForgedAnswer,
    DnssecIndeterminate,
    DnssecBogus,
    SignatureExpired,
    SignatureNotYetValid,
    DnskeyMissing,
    RrsigsMissing,
    NoZoneKeyBitSet,
    NsecMissing,
    CachedError,
    NotReady,
    Blocked,
    Censored,
    Filtered,
    Prohibited,
    StaleNxdomainAnswer,
    NotAuthoritative,
    NotSupported,
    NoReachableAuthority,
    NetworkError,
    InvalidData,
    Int(u16),
}

Extended DNS error codes.

A complementary data can be put in EDNS opt, providing additional information about the cause of DNS errors. Defined in RFC 8914. Current registered values can be found in IANA registry.

Variants

Other

The error in question falls into a category that does not match known extended error codes. Implementations SHOULD include an EXTRA-TEXT value to augment this error code with additional information.

UnsupportedDnskeyAlgorithm

The resolver attempted to perform DNSSEC validation, but a DNSKEY RRset contained only unsupported DNSSEC algorithms.

UnsupportedDsDigestType

The resolver attempted to perform DNSSEC validation, but a DS RRset contained only unsupported Digest Types.

StaleAnswer

The resolver was unable to resolve the answer within its time limits and decided to answer with previously cached data instead of answering with an error. This is typically caused by problems communicating with an authoritative server, possibly as result of a denial of service (DoS) attack against another network. (See also Code 19.)

ForgedAnswer

For policy reasons (legal obligation or malware filtering, for instance), an answer was forged. Note that this should be used when an answer is still provided, not when failure codes are returned instead. See Blocked (15), Censored (16), and Filtered (17) for use when returning other response codes.

DnssecIndeterminate

The resolver attempted to perform DNSSEC validation, but validation ended in the Indeterminate state RFC 4035.

DnssecBogus

The resolver attempted to perform DNSSEC validation, but validation ended in the Bogus state.

SignatureExpired

The resolver attempted to perform DNSSEC validation, but no signatures are presently valid and some (often all) are expired.

SignatureNotYetValid

The resolver attempted to perform DNSSEC validation, but no signatures are presently valid and at least some are not yet valid.

DnskeyMissing

A DS record existed at a parent, but no supported matching DNSKEY record could be found for the child.

RrsigsMissing

The resolver attempted to perform DNSSEC validation, but no RRSIGs could be found for at least one RRset where RRSIGs were expected.

NoZoneKeyBitSet

The resolver attempted to perform DNSSEC validation, but no Zone Key Bit was set in a DNSKEY.

NsecMissing

The resolver attempted to perform DNSSEC validation, but the requested data was missing and a covering NSEC or NSEC3 was not provided.

CachedError

The resolver is returning the SERVFAIL RCODE from its cache.

NotReady

The server is unable to answer the query, as it was not fully functional when the query was received.

Blocked

The server is unable to respond to the request because the domain is on a blocklist due to an internal security policy imposed by the operator of the server resolving or forwarding the query.

Censored

The server is unable to respond to the request because the domain is on a blocklist due to an external requirement imposed by an entity other than the operator of the server resolving or forwarding the query. Note that how the imposed policy is applied is irrelevant (in-band DNS filtering, court order, etc.).

Filtered

The server is unable to respond to the request because the domain is on a blocklist as requested by the client. Functionally, this amounts to “you requested that we filter domains like this one.”

Prohibited

An authoritative server or recursive resolver that receives a query from an “unauthorized” client can annotate its REFUSED message with this code. Examples of “unauthorized” clients are recursive queries from IP addresses outside the network, blocklisted IP addresses, local policy, etc.

StaleNxdomainAnswer

The resolver was unable to resolve an answer within its configured time limits and decided to answer with a previously cached NXDOMAIN answer instead of answering with an error. This may be caused, for example, by problems communicating with an authoritative server, possibly as result of a denial of service (DoS) attack against another network. (See also Code 3.)

NotAuthoritative

An authoritative server that receives a query with the Recursion Desired (RD) bit clear, or when it is not configured for recursion for a domain for which it is not authoritative, SHOULD include this EDE code in the REFUSED response. A resolver that receives a query with the RD bit clear SHOULD include this EDE code in the REFUSED response.

NotSupported

The requested operation or query is not supported.

NoReachableAuthority

The resolver could not reach any of the authoritative name servers (or they potentially refused to reply).

NetworkError

An unrecoverable error occurred while communicating with another server.

InvalidData

The authoritative server cannot answer with data for a zone it is otherwise configured to support. Examples of this include its most recent zone being too old or having expired.

Int(u16)

A raw value given through its integer.

Implementations

impl ExtendedErrorCode

pub const fn from_int(value: u16) -> Self

Returns a value from its raw integer value.

pub const fn to_int(self) -> u16

Returns the raw integer value for a value.

pub fn from_mnemonic(m: &[u8]) -> Option<Self>

Returns a value from a well-defined mnemonic.

pub const fn to_mnemonic(self) -> Option<&'static [u8]>

Returns the mnemonic for this value if there is one.

This will also return a mnemonic if a well-defined variant is hidden in a Int variant.

pub fn parse<'a, Octs: AsRef<[u8]> + ?Sized>( parser: &mut Parser<'a, Octs>, ) -> Result<Self, ParseError>

pub const COMPOSE_LEN: u16 = 2u16

pub fn compose<Target: OctetsBuilder + ?Sized>( &self, target: &mut Target, ) -> Result<(), Target::AppendError>

Trait Implementations

impl Clone for ExtendedErrorCode

fn clone(&self) -> ExtendedErrorCode

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ExtendedErrorCode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for ExtendedErrorCode

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<'a> From<&'a ExtendedErrorCode> for u16

fn from(value: &'a ExtendedErrorCode) -> Self

Converts to this type from the input type.

impl<Octs> From<ExtendedErrorCode> for ExtendedError<Octs>

fn from(code: ExtendedErrorCode) -> Self

Converts to this type from the input type.

impl From<ExtendedErrorCode> for u16

fn from(value: ExtendedErrorCode) -> Self

Converts to this type from the input type.

impl From<u16> for ExtendedErrorCode

fn from(value: u16) -> Self

Converts to this type from the input type.

impl Hash for ExtendedErrorCode

fn hash<H: Hasher>(&self, state: &mut H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for ExtendedErrorCode

fn cmp(&self, other: &Self) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq<ExtendedErrorCode> for u16

fn eq(&self, other: &ExtendedErrorCode) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u16> for ExtendedErrorCode

fn eq(&self, other: &u16) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for ExtendedErrorCode

fn eq(&self, other: &Self) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<ExtendedErrorCode> for u16

fn partial_cmp(&self, other: &ExtendedErrorCode) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u16> for ExtendedErrorCode

fn partial_cmp(&self, other: &u16) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd for ExtendedErrorCode

fn partial_cmp(&self, other: &Self) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Copy for ExtendedErrorCode

impl Eq for ExtendedErrorCode