Module winnow::combinator

List of parsers and combinators

Note: this list is meant to provide a nicer way to find a parser than reading through the documentation on docs.rs. Function combinators are organized in module so they are a bit easier to find.

Basic elements

Those are used to recognize the lowest level elements of your grammar, like, “here is a dot”, or “here is an big endian integer”.

combinator	usage	input	output	comment
one_of	one_of(['a', 'b', 'c'])	"abc"	Ok(("bc", 'a'))	Matches one of the provided characters (works with non ASCII characters too)
none_of	none_of(['a', 'b', 'c'])	"xyab"	Ok(("yab", 'x'))	Matches anything but the provided characters
tag	"hello"	"hello world"	Ok((" world", "hello"))	Recognizes a specific suite of characters or bytes
tag_no_case	tag_no_case("hello")	"HeLLo World"	Ok((" World", "HeLLo"))	Case insensitive comparison. Note that case insensitive comparison is not well defined for unicode, and that you might have bad surprises
take	take(4)	"hello"	Ok(("o", "hell"))	Takes a specific number of bytes or characters
take_while	take_while(0.., is_alphabetic)	"abc123"	Ok(("123", "abc"))	Returns the longest list of bytes for which the provided pattern matches.
take_till0	take_till0(is_alphabetic)	"123abc"	Ok(("abc", "123"))	Returns the longest list of bytes or characters until the provided pattern matches. take_till1 does the same, but must return at least one character. This is the reverse behaviour from take_while: take_till(f) is equivalent to take_while(0.., \|c\| !f(c))
take_until0	take_until0("world")	"Hello world"	Ok(("world", "Hello "))	Returns the longest list of bytes or characters until the provided tag is found. take_until1 does the same, but must return at least one character

Choice combinators

combinator	usage	input	output	comment
alt	alt(("ab", "cd"))	"cdef"	Ok(("ef", "cd"))	Try a list of parsers and return the result of the first successful one
dispatch	-	-	-	match for parsers
permutation	permutation(("ab", "cd", "12"))	"cd12abc"	Ok(("c", ("ab", "cd", "12"))	Succeeds when all its child parser have succeeded, whatever the order

Sequence combinators

combinator	usage	input	output	comment
(...) (tuples)	("ab", "XY", take(1))	"abXYZ!"	Ok(("!", ("ab", "XY", "Z")))	Chains parsers and assemble the sub results in a tuple. You can use as many child parsers as you can put elements in a tuple
delimited	delimited(char('('), take(2), char(')'))	"(ab)cd"	Ok(("cd", "ab"))
preceded	preceded("ab", "XY")	"abXYZ"	Ok(("Z", "XY"))
terminated	terminated("ab", "XY")	"abXYZ"	Ok(("Z", "ab"))
separated_pair	separated_pair("hello", char(','), "world")	"hello,world!"	Ok(("!", ("hello", "world")))

Applying a parser multiple times

combinator	usage	input	output	comment
repeat	repeat(1..=3, "ab")	"ababc"	Ok(("c", vec!["ab", "ab"]))	Applies the parser between m and n times (n included) and returns the list of results in a Vec
repeat_till0	repeat_till0(tag( "ab" ), tag( "ef" ))	"ababefg"	Ok(("g", (vec!["ab", "ab"], "ef")))	Applies the first parser until the second applies. Returns a tuple containing the list of results from the first in a Vec and the result of the second
separated0	separated0("ab", ",")	"ab,ab,ab."	Ok((".", vec!["ab", "ab", "ab"]))	separated1 works like separated0 but must returns at least one element
fold_repeat	fold_repeat(1..=2, be_u8, \|\| 0, \|acc, item\| acc + item)	[1, 2, 3]	Ok(([3], 3))	Applies the parser between m and n times (n included) and folds the list of return value

Partial related

• eof: Returns its input if it is at the end of input data
• Parser::complete_err: Replaces an Incomplete returned by the child parser with an Backtrack

Modifiers

• cond: Conditional combinator. Wraps another parser and calls it if the condition is met
• Parser::flat_map: method to map a new parser from the output of the first parser, then apply that parser over the rest of the input
• Parser::value: method to replace the result of a parser
• Parser::map: method to map a function on the result of a parser
• Parser::and_then: Applies a second parser over the output of the first one
• Parser::verify_map: Maps a function returning an Option on the output of a parser
• Parser::try_map: Maps a function returning a Result on the output of a parser
• Parser::parse_to: Apply std::str::FromStr to the output of the parser
• not: Returns a result only if the embedded parser returns Backtrack or Incomplete. Does not consume the input
• opt: Make the underlying parser optional
• peek: Returns a result without consuming the input
• Parser::recognize: If the child parser was successful, return the consumed input as the produced value
• Parser::with_recognized: If the child parser was successful, return a tuple of the consumed input and the produced output.
• Parser::span: If the child parser was successful, return the location of the consumed input as the produced value
• Parser::with_span: If the child parser was successful, return a tuple of the location of the consumed input and the produced output.
• Parser::verify: Returns the result of the child parser if it satisfies a verification function

Error management and debugging

• cut_err: Commit the parse result, disallowing alternative parsers from being attempted
• backtrack_err: Attemmpts a parse, allowing alternative parsers to be attempted despite use of cut_err
• Parser::context: Add context to the error if the parser fails
• trace: Print the parse state with the debug feature flag
• todo(): Placeholder parser

Remaining combinators

• success: Returns a value without consuming any input, always succeeds
• fail: Inversion of success. Always fails.
• Parser::by_ref: Allow moving &mut impl Parser into other parsers

Text parsing

• any: Matches one token

• tab: Matches a tab character \t

• crlf: Recognizes the string \r\n

• line_ending: Recognizes an end of line (both \n and \r\n)

• newline: Matches a newline character \n

• not_line_ending: Recognizes a string of any char except \r or \n

• rest: Return the remaining input

• alpha0: Recognizes zero or more lowercase and uppercase alphabetic characters: [a-zA-Z]. alpha1 does the same but returns at least one character

• alphanumeric0: Recognizes zero or more numerical and alphabetic characters: [0-9a-zA-Z]. alphanumeric1 does the same but returns at least one character

• space0: Recognizes zero or more spaces and tabs. space1 does the same but returns at least one character

• multispace0: Recognizes zero or more spaces, tabs, carriage returns and line feeds. multispace1 does the same but returns at least one character

• digit0: Recognizes zero or more numerical characters: [0-9]. digit1 does the same but returns at least one character

• hex_digit0: Recognizes zero or more hexadecimal numerical characters: [0-9A-Fa-f]. hex_digit1 does the same but returns at least one character

• oct_digit0: Recognizes zero or more octal characters: [0-7]. oct_digit1 does the same but returns at least one character

• float: Parse a floating point number in a byte string

• dec_int: Decode a variable-width, decimal signed integer

• dec_uint: Decode a variable-width, decimal unsigned integer

• hex_uint: Decode a variable-width, hexadecimal integer

• escaped: Matches a byte string with escaped characters

• escaped_transform: Matches a byte string with escaped characters, and returns a new string with the escaped characters replaced

Character test functions

Use these functions with a combinator like take_while:

• AsChar::is_alpha: Tests if byte is ASCII alphabetic: [A-Za-z]
• AsChar::is_alphanum: Tests if byte is ASCII alphanumeric: [A-Za-z0-9]
• AsChar::is_dec_digit: Tests if byte is ASCII digit: [0-9]
• AsChar::is_hex_digit: Tests if byte is ASCII hex digit: [0-9A-Fa-f]
• AsChar::is_oct_digit: Tests if byte is ASCII octal digit: [0-7]
• AsChar::is_space: Tests if byte is ASCII space or tab: [ \t]
• AsChar::is_newline: Tests if byte is ASCII newline: [\n]

Binary format parsing

• length_count Gets a number from the first parser, then applies the second parser that many times
• length_data: Gets a number from the first parser, then takes a subslice of the input of that size, and returns that subslice
• length_value: Gets a number from the first parser, takes a subslice of the input of that size, then applies the second parser on that subslice. If the second parser returns Incomplete, length_value will return an error

Integers

Parsing integers from binary formats can be done in two ways: With parser functions, or combinators with configurable endianness.

• configurable endianness: i16, i32, i64, u16, u32, u64 are combinators that take as argument a winnow::binary::Endianness, like this: i16(endianness). If the parameter is winnow::binary::Endianness::Big, parse a big endian i16 integer, otherwise a little endian i16 integer.
• fixed endianness: The functions are prefixed by be_ for big endian numbers, and by le_ for little endian numbers, and the suffix is the type they parse to. As an example, be_u32 parses a big endian unsigned integer stored in 32 bits.
  • be_f32, be_f64: Big endian floating point numbers
  • le_f32, le_f64: Little endian floating point numbers
  • be_i8, be_i16, be_i24, be_i32, be_i64, be_i128: Big endian signed integers
  • be_u8, be_u16, be_u24, be_u32, be_u64, be_u128: Big endian unsigned integers
  • le_i8, le_i16, le_i24, le_i32, le_i64, le_i128: Little endian signed integers
  • le_u8, le_u16, le_u24, le_u32, le_u64, le_u128: Little endian unsigned integers

Bit stream parsing

• bits: Transforms the current input type (byte slice &[u8]) to a bit stream on which bit specific parsers and more general combinators can be applied
• bytes: Transforms its bits stream input back into a byte slice for the underlying parser
• take: Take a set number of its
• tag: Check if a set number of bis matches a pattern
• bool: Match any one bit

Macros

• dispatch
  match for parsers

Structs

• AndThen
  Implementation of Parser::and_then
• ByRef
  Implementation of Parser::by_ref
• CompleteErr
  Implementation of Parser::complete_err
• Context
  Implementation of Parser::context
• ErrInto
  Implementation of Parser::err_into
• FlatMap
  Implementation of Parser::flat_map
• Map
  Implementation of Parser::map
• OutputInto
  Implementation of Parser::output_into
• ParseTo
  Implementation of Parser::parse_to
• ParserIterator
  Main structure associated to iterator.
• Recognize
  Implementation of Parser::recognize
• Span
  Implementation of Parser::span
• TryMap
  Implementation of Parser::try_map
• Value
  Implementation of Parser::value
• Verify
  Implementation of Parser::verify
• VerifyMap
  Implementation of Parser::verify_map
• Void
  Implementation of Parser::void
• WithRecognized
  Implementation of Parser::with_recognized
• WithSpan
  Implementation of Parser::with_span

Traits

• Alt
  Helper trait for the alt() combinator.
• Permutation
  Helper trait for the permutation() combinator.

Functions

• alt
  Pick the first successful parser
• backtrack_err
  Transforms an ErrMode::Cut (unrecoverable) to ErrMode::Backtrack (recoverable)
• cond
  Calls the parser if the condition is met.
• cut_err
  Transforms an ErrMode::Backtrack (recoverable) to ErrMode::Cut (unrecoverable)
• delimited
  Sequence three parsers, only returning the output of the second.
• eof
  Match the end of the Stream
• fail
  A parser which always fails.
• fill
  Repeats the embedded parser, filling the given slice with results.
• fold_repeat
  Repeats the embedded parser m..=n times, calling g to gather the results
• iterator
  Repeats the embedded parser, lazily returning the results
• not
  Succeeds if the child parser returns an error.
• opt
  Apply a Parser, producing None on ErrMode::Backtrack.
• peek
  Tries to apply its parser without consuming the input.
• permutation
  Applies a list of parsers in any order.
• preceded
  Sequence two parsers, only returning the output from the second.
• repeat
  Accumulate the output of a parser into a container, like Vec
• repeat_till0
  Accumulate the output of parser f into a container, like Vec, until the parser g produces a result.
• rest
  Return the remaining input.
• rest_len
  Return the length of the remaining input.
• separated0
  Accumulate the output of a parser, interleaed with sep
• separated1
  Accumulate the output of a parser, interleaed with sep
• separated_foldl1
  Alternates between two parsers, merging the results (left associative)
• separated_foldr1
  Alternates between two parsers, merging the results (right associative)
• separated_pair
  Sequence three parsers, only returning the values of the first and third.
• success
  Always succeeds with given value without consuming any input.
• terminated
  Sequence two parsers, only returning the output of the first.
• todo
  A placeholder for a not-yet-implemented Parser