use crate::{
    engine::{general_purpose::INVALID_VALUE, DecodeEstimate, DecodeMetadata, DecodePaddingMode},
    DecodeError, PAD_BYTE,
};

// decode logic operates on chunks of 8 input bytes without padding
const INPUT_CHUNK_LEN: usize = 8;
const DECODED_CHUNK_LEN: usize = 6;

// we read a u64 and write a u64, but a u64 of input only yields 6 bytes of output, so the last
// 2 bytes of any output u64 should not be counted as written to (but must be available in a
// slice).
const DECODED_CHUNK_SUFFIX: usize = 2;

// how many u64's of input to handle at a time
const CHUNKS_PER_FAST_LOOP_BLOCK: usize = 4;

const INPUT_BLOCK_LEN: usize = CHUNKS_PER_FAST_LOOP_BLOCK * INPUT_CHUNK_LEN;

// includes the trailing 2 bytes for the final u64 write
const DECODED_BLOCK_LEN: usize =
    CHUNKS_PER_FAST_LOOP_BLOCK * DECODED_CHUNK_LEN + DECODED_CHUNK_SUFFIX;

#[doc(hidden)]
pub struct GeneralPurposeEstimate {
    /// Total number of decode chunks, including a possibly partial last chunk
    num_chunks: usize,
    decoded_len_estimate: usize,
}

impl GeneralPurposeEstimate {
    pub(crate) fn new(encoded_len: usize) -> Self {
        // Formulas that won't overflow
        Self {
            num_chunks: encoded_len / INPUT_CHUNK_LEN
                + (encoded_len % INPUT_CHUNK_LEN > 0) as usize,
            decoded_len_estimate: (encoded_len / 4 + (encoded_len % 4 > 0) as usize) * 3,
        }
    }
}

impl DecodeEstimate for GeneralPurposeEstimate {
    fn decoded_len_estimate(&self) -> usize {
        self.decoded_len_estimate
    }
}

/// Helper to avoid duplicating num_chunks calculation, which is costly on short inputs.
/// Returns the decode metadata, or an error.
// We're on the fragile edge of compiler heuristics here. If this is not inlined, slow. If this is
// inlined(always), a different slow. plain ol' inline makes the benchmarks happiest at the moment,
// but this is fragile and the best setting changes with only minor code modifications.
#[inline]
pub(crate) fn decode_helper(
    input: &[u8],
    estimate: GeneralPurposeEstimate,
    output: &mut [u8],
    decode_table: &[u8; 256],
    decode_allow_trailing_bits: bool,
    padding_mode: DecodePaddingMode,
) -> Result<DecodeMetadata, DecodeError> {
    let remainder_len = input.len() % INPUT_CHUNK_LEN;

    // Because the fast decode loop writes in groups of 8 bytes (unrolled to
    // CHUNKS_PER_FAST_LOOP_BLOCK times 8 bytes, where possible) and outputs 8 bytes at a time (of
    // which only 6 are valid data), we need to be sure that we stop using the fast decode loop
    // soon enough that there will always be 2 more bytes of valid data written after that loop.
    let trailing_bytes_to_skip = match remainder_len {
        // if input is a multiple of the chunk size, ignore the last chunk as it may have padding,
        // and the fast decode logic cannot handle padding
        0 => INPUT_CHUNK_LEN,
        // 1 and 5 trailing bytes are illegal: can't decode 6 bits of input into a byte
        1 | 5 => {
            // trailing whitespace is so common that it's worth it to check the last byte to
            // possibly return a better error message
            if let Some(b) = input.last() {
                if *b != PAD_BYTE && decode_table[*b as usize] == INVALID_VALUE {
                    return Err(DecodeError::InvalidByte(input.len() - 1, *b));
                }
            }

            return Err(DecodeError::InvalidLength);
        }
        // This will decode to one output byte, which isn't enough to overwrite the 2 extra bytes
        // written by the fast decode loop. So, we have to ignore both these 2 bytes and the
        // previous chunk.
        2 => INPUT_CHUNK_LEN + 2,
        // If this is 3 un-padded chars, then it would actually decode to 2 bytes. However, if this
        // is an erroneous 2 chars + 1 pad char that would decode to 1 byte, then it should fail
        // with an error, not panic from going past the bounds of the output slice, so we let it
        // use stage 3 + 4.
        3 => INPUT_CHUNK_LEN + 3,
        // This can also decode to one output byte because it may be 2 input chars + 2 padding
        // chars, which would decode to 1 byte.
        4 => INPUT_CHUNK_LEN + 4,
        // Everything else is a legal decode len (given that we don't require padding), and will
        // decode to at least 2 bytes of output.
        _ => remainder_len,
    };

    // rounded up to include partial chunks
    let mut remaining_chunks = estimate.num_chunks;

    let mut input_index = 0;
    let mut output_index = 0;

    {
        let length_of_fast_decode_chunks = input.len().saturating_sub(trailing_bytes_to_skip);

        // Fast loop, stage 1
        // manual unroll to CHUNKS_PER_FAST_LOOP_BLOCK of u64s to amortize slice bounds checks
        if let Some(max_start_index) = length_of_fast_decode_chunks.checked_sub(INPUT_BLOCK_LEN) {
            while input_index <= max_start_index {
                let input_slice = &input[input_index..(input_index + INPUT_BLOCK_LEN)];
                let output_slice = &mut output[output_index..(output_index + DECODED_BLOCK_LEN)];

                decode_chunk(
                    &input_slice[0..],
                    input_index,
                    decode_table,
                    &mut output_slice[0..],
                )?;
                decode_chunk(
                    &input_slice[8..],
                    input_index + 8,
                    decode_table,
                    &mut output_slice[6..],
                )?;
                decode_chunk(
                    &input_slice[16..],
                    input_index + 16,
                    decode_table,
                    &mut output_slice[12..],
                )?;
                decode_chunk(
                    &input_slice[24..],
                    input_index + 24,
                    decode_table,
                    &mut output_slice[18..],
                )?;

                input_index += INPUT_BLOCK_LEN;
                output_index += DECODED_BLOCK_LEN - DECODED_CHUNK_SUFFIX;
                remaining_chunks -= CHUNKS_PER_FAST_LOOP_BLOCK;
            }
        }

        // Fast loop, stage 2 (aka still pretty fast loop)
        // 8 bytes at a time for whatever we didn't do in stage 1.
        if let Some(max_start_index) = length_of_fast_decode_chunks.checked_sub(INPUT_CHUNK_LEN) {
            while input_index < max_start_index {
                decode_chunk(
                    &input[input_index..(input_index + INPUT_CHUNK_LEN)],
                    input_index,
                    decode_table,
                    &mut output
                        [output_index..(output_index + DECODED_CHUNK_LEN + DECODED_CHUNK_SUFFIX)],
                )?;

                output_index += DECODED_CHUNK_LEN;
                input_index += INPUT_CHUNK_LEN;
                remaining_chunks -= 1;
            }
        }
    }

    // Stage 3
    // If input length was such that a chunk had to be deferred until after the fast loop
    // because decoding it would have produced 2 trailing bytes that wouldn't then be
    // overwritten, we decode that chunk here. This way is slower but doesn't write the 2
    // trailing bytes.
    // However, we still need to avoid the last chunk (partial or complete) because it could
    // have padding, so we always do 1 fewer to avoid the last chunk.
    for _ in 1..remaining_chunks {
        decode_chunk_precise(
            &input[input_index..],
            input_index,
            decode_table,
            &mut output[output_index..(output_index + DECODED_CHUNK_LEN)],
        )?;

        input_index += INPUT_CHUNK_LEN;
        output_index += DECODED_CHUNK_LEN;
    }

    // always have one more (possibly partial) block of 8 input
    debug_assert!(input.len() - input_index > 1 || input.is_empty());
    debug_assert!(input.len() - input_index <= 8);

    super::decode_suffix::decode_suffix(
        input,
        input_index,
        output,
        output_index,
        decode_table,
        decode_allow_trailing_bits,
        padding_mode,
    )
}

/// Decode 8 bytes of input into 6 bytes of output. 8 bytes of output will be written, but only the
/// first 6 of those contain meaningful data.
///
/// `input` is the bytes to decode, of which the first 8 bytes will be processed.
/// `index_at_start_of_input` is the offset in the overall input (used for reporting errors
/// accurately)
/// `decode_table` is the lookup table for the particular base64 alphabet.
/// `output` will have its first 8 bytes overwritten, of which only the first 6 are valid decoded
/// data.
// yes, really inline (worth 30-50% speedup)
#[inline(always)]
fn decode_chunk(
    input: &[u8],
    index_at_start_of_input: usize,
    decode_table: &[u8; 256],
    output: &mut [u8],
) -> Result<(), DecodeError> {
    let morsel = decode_table[input[0] as usize];
    if morsel == INVALID_VALUE {
        return Err(DecodeError::InvalidByte(index_at_start_of_input, input[0]));
    }
    let mut accum = (morsel as u64) << 58;

    let morsel = decode_table[input[1] as usize];
    if morsel == INVALID_VALUE {
        return Err(DecodeError::InvalidByte(
            index_at_start_of_input + 1,
            input[1],
        ));
    }
    accum |= (morsel as u64) << 52;

    let morsel = decode_table[input[2] as usize];
    if morsel == INVALID_VALUE {
        return Err(DecodeError::InvalidByte(
            index_at_start_of_input + 2,
            input[2],
        ));
    }
    accum |= (morsel as u64) << 46;

    let morsel = decode_table[input[3] as usize];
    if morsel == INVALID_VALUE {
        return Err(DecodeError::InvalidByte(
            index_at_start_of_input + 3,
            input[3],
        ));
    }
    accum |= (morsel as u64) << 40;

    let morsel = decode_table[input[4] as usize];
    if morsel == INVALID_VALUE {
        return Err(DecodeError::InvalidByte(
            index_at_start_of_input + 4,
            input[4],
        ));
    }
    accum |= (morsel as u64) << 34;

    let morsel = decode_table[input[5] as usize];
    if morsel == INVALID_VALUE {
        return Err(DecodeError::InvalidByte(
            index_at_start_of_input + 5,
            input[5],
        ));
    }
    accum |= (morsel as u64) << 28;

    let morsel = decode_table[input[6] as usize];
    if morsel == INVALID_VALUE {
        return Err(DecodeError::InvalidByte(
            index_at_start_of_input + 6,
            input[6],
        ));
    }
    accum |= (morsel as u64) << 22;

    let morsel = decode_table[input[7] as usize];
    if morsel == INVALID_VALUE {
        return Err(DecodeError::InvalidByte(
            index_at_start_of_input + 7,
            input[7],
        ));
    }
    accum |= (morsel as u64) << 16;

    write_u64(output, accum);

    Ok(())
}

/// Decode an 8-byte chunk, but only write the 6 bytes actually decoded instead of including 2
/// trailing garbage bytes.
#[inline]
fn decode_chunk_precise(
    input: &[u8],
    index_at_start_of_input: usize,
    decode_table: &[u8; 256],
    output: &mut [u8],
) -> Result<(), DecodeError> {
    let mut tmp_buf = [0_u8; 8];

    decode_chunk(
        input,
        index_at_start_of_input,
        decode_table,
        &mut tmp_buf[..],
    )?;

    output[0..6].copy_from_slice(&tmp_buf[0..6]);

    Ok(())
}

#[inline]
fn write_u64(output: &mut [u8], value: u64) {
    output[..8].copy_from_slice(&value.to_be_bytes());
}

#[cfg(test)]
mod tests {
    use super::*;

    use crate::engine::general_purpose::STANDARD;

    #[test]
    fn decode_chunk_precise_writes_only_6_bytes() {
        let input = b"Zm9vYmFy"; // "foobar"
        let mut output = [0_u8, 1, 2, 3, 4, 5, 6, 7];

        decode_chunk_precise(&input[..], 0, &STANDARD.decode_table, &mut output).unwrap();
        assert_eq!(&vec![b'f', b'o', b'o', b'b', b'a', b'r', 6, 7], &output);
    }

    #[test]
    fn decode_chunk_writes_8_bytes() {
        let input = b"Zm9vYmFy"; // "foobar"
        let mut output = [0_u8, 1, 2, 3, 4, 5, 6, 7];

        decode_chunk(&input[..], 0, &STANDARD.decode_table, &mut output).unwrap();
        assert_eq!(&vec![b'f', b'o', b'o', b'b', b'a', b'r', 0, 0], &output);
    }

    #[test]
    fn estimate_short_lengths() {
        for (range, (num_chunks, decoded_len_estimate)) in [
            (0..=0, (0, 0)),
            (1..=4, (1, 3)),
            (5..=8, (1, 6)),
            (9..=12, (2, 9)),
            (13..=16, (2, 12)),
            (17..=20, (3, 15)),
        ] {
            for encoded_len in range {
                let estimate = GeneralPurposeEstimate::new(encoded_len);
                assert_eq!(num_chunks, estimate.num_chunks);
                assert_eq!(decoded_len_estimate, estimate.decoded_len_estimate);
            }
        }
    }

    #[test]
    fn estimate_via_u128_inflation() {
        // cover both ends of usize
        (0..1000)
            .chain(usize::MAX - 1000..=usize::MAX)
            .for_each(|encoded_len| {
                // inflate to 128 bit type to be able to safely use the easy formulas
                let len_128 = encoded_len as u128;

                let estimate = GeneralPurposeEstimate::new(encoded_len);
                assert_eq!(
                    ((len_128 + (INPUT_CHUNK_LEN - 1) as u128) / (INPUT_CHUNK_LEN as u128))
                        as usize,
                    estimate.num_chunks
                );
                assert_eq!(
                    ((len_128 + 3) / 4 * 3) as usize,
                    estimate.decoded_len_estimate
                );
            })
    }
}